Full Steel Laboratory Storage Gasm Cylinder Cabints System
Technical Parameters of Gas Cabinets:
|Product Name||Gas Cabinets|
|Power Supply||AC220V, 50HZ|
|Return to normal working time||≤ 30s|
|Power||40W (exhaust State)|
|Alarm Mode||Sound and light alarm|
|Alarm Volume||≥ 80dB|
|Response Time||≤ 30s|
Specifications of Gas Cabinets:
1. 1.2mm cold rolled steel plate, sheet metal structure blasting
points based on position in Cabinet back, effectively preventing
accident hazard control at the same time to a minimum.
2. Epoxy coating both inside and outside of the Cabinet, acid and
alkali and organic solvent.
3. Using three-point linkage, lock control, increase the impact
resistance of the door.
4. With cable fixation cylinders, stability and superior
5. Using a metal handle. Facilitate the smooth opening.
6. All steel hinges to ensure smooth opening of the door at the
same time in increased firm.
7. Gas cylinders are classified into ordinary type, automatic
This alarm system can be continuous and automatic monitoring indoor
gas, acetylene, hydrogen, methane, and other gases that leaked and
reached explosive concentrations: minimum 0.1 (LEL)-ceiling 0.25
(LEL) in alert probe sensor will sense that and when, effectively
avoid the accident gas manufacture.
* Lights: when the accident occurred, photoelectric alarms;
* Buzzer: when the accident occurred, and audible alarms;
* Ring tone switch: when the alarm sounds agitated this sound can
be switched off;
* Exhaust switch: the alarm stops automatically after pressing this
switch can exhaust gases in the Cabinet;
* Test switch: test that the warning lamp and buzzer works
* Power switch: cylinder Cabinet power switch;
Photos of Gas Cabinets: